T+A PA 3000 HV Integrated Amplifier
The P 3000 HV pre-amplifier and the A 3000 HV power amplifier share many components with the PA 3000 HV, as well as the fundamental design principles and circuit topology. Most of the case components are the same, and the PA 3000 HV and A 3000 HV also employ the same mains units and voltage supplies, output stages, input amplifier and high-voltage amplifier stages. The P 3000 HV pre-amplifier also shares many parts such as the input section, the pre-amplifier, the relay-based volume control, the output section and the front case profiles, complete with control processor and VFD screen.
The sound, the measured results, the specification and the power generated represent the limit of what is physically feasible for an integrated amplifier of this size. The components and materials employed are uncompromisingly first-class, and the casework sets standards, which are not equaled even by much more expensive machines.
Frequency response + 0 / ‚¬œ 3 dB 0,5 Hz ‚¬œ300 kHz External / noise voltage separation 105 / 110 dB Distortion factor < 0,001% Intermodulation < 0,001% Channel separation > 90 dB
Input sensitivity nominal
High level (RCA) 7 x 250 mVeff ... 6 Veff / 20 kOhm Symmetrical (XLR) 4 x 500 mVeff ... 12 Veff / 5 kOhm
headphones 50 ohms 1 x recorder 250 mVeff / 100 ohms PRE out RCA Nom 1 Veff, max 9.5 Veff / 50 Ohm PRE OUT XLR Nom 1.45 Veff, max 19.6 Veff / 50 Ohm
Rated output per channel at 8 ohms 300 watts Rated output per channel at 4 Ohm 500 watts Pulse power at 8 ohms 380 watts Pulse power at 4 ohms 700 watts Power bandwidth 1 Hz - 150 kHz Frequency response + 0 / - 3 dB 0.5 Hz - 180 kHz Rate of increase 60 V / μs Damping factor > 65Noise distance > 115 dB Distortion factor <0.03% Screening 120000 μ
Connection / Accessories / Dimensions
Power supply 110-120V / 60Hz or 220-240V / 50Hz / 1500W Standby mode <0.5 W Remote control F 3000 Additional equipment Trigger input +5 ... 20V for remote power-
configurable input 4 as a front channel surround decoder
Dimensions (H x W x D) 17 x 46 x 46 cm weight 38 kg Specifications Housing silver lacquer 47 or titanium 42
Heatsink black 42
All eligible company warranty and service support is being provided on T+A PA 3000 HV Integrated Amplifier