Taga Harmony TTA-500
TTA-500 is 2 x 35W Class AB high fidelity vacuum tube integrated amplifier utilizing four EL34 tubes in the output stage and a 12AX7 tube preamp section, composed of two 6SN7 tubes as drivers, and a Triode / Pentode mode selector switch.
TTA-500 uses audiophile-grade coupling capacitors: Wima for input and connecting driver tubes with the output amp, and Rubycon capacitors in the power filtering.
The amplifier sounds in a very warm, lifelike way and high dynamics and the sound is very linear with almost no negative feedback.
High-quality EI broadband sound output transformer provides voltage stability and constant and immediately-available energy at any volume level.
The both channels use independent rectifier and filter circuits in the supply power.
The sound is natural and fresh with deep multidimensional soundstage.
The audiophile grade Japanese ALPS volume potentiometer ensures minimal noises and channels crosstalk and has excellent operational feel and limits errors between the two channels.
The high-end class, gold-plated speaker terminals offer almost lossless audio signal transmission to speakers.
Analog inputs with high-end solid machined brass RCA sockets can accommodate up to 3 stereo devices.
The preamplifier input (HT input) is dedicated for using the TTA-500 as a tube power amplifier and allows to connect it to your Home Theatre system (AV receiver or amp) to drive front left and right channels - now you can use the same pair of speakers in your high-end stereo as well as in the multichannel system without switching speaker cables nor changing the amplifier.
The removable IEC power cable gives you an option to upgrade your system with a premium audiophile power cable in any time.
The TTA-500 amplifier does not only sound great but it also looks magnificently. The front and side walls of the housing are made of thick 6 mm aluminum. The vacuum tube decorative panel is finished in a modern brushed aluminum color.
Enjoy the analog sound at its best – enjoy the TTA-500!
Design Vacuum tube amplifier
Push-pull Class A/B
Vacuum tubes 4 x EL34, 2 x 6SN7, 1 x 12AX7
Manual bias regulation
Power output / impedance 2 x 35W Pentode mode
2 x 17W Triode mode
Analog inputs CD, Line, Aux:
• Sensitivity: 400mV
• Impedance: RCA 50K ohm
HT Stereo (PRE IN):
• Sensitivity: 1000mV
• Impedance: RCA 50K ohm
Frequency response 10Hz - 40kHz (±1dB) Total Harmonic Distortions ≤0.2%(1KHz/2V) Signal/Noise ratio 89db Features / accessories Manual bias adjustment
Aluminum remote controller
Tube cage (factory installed)
Removable IEC power cord
White cotton gloves
AC power / power consumption 230-240V 50Hz, 190W Dimensions (H x W x D) 22 x 38 x 34.5 cm Weight 19.5 kg / pc.